applications

FRA-108S

Overview

Inter-M has developed solutions such as FTA/FRA-108S to transmit High quality uncompressed

multi-channel audio and control over TCP/IP networks, dedicated copper lines and Optical fiber cables.

FTA/FRA-108S will transport high quality 8-channel audio signals, serial data and contact closure

triggers over long distances (up to 28km) using Single-mode fiber-optic cable.

These products will transport high quality uncompressed audio signals combined with data and contact

triggers with very short and relatively small propagation delay of 1.0 ms.

Feature

 - TRANSMIT THE 2 CHANNEL AND 8 CHANNEL BALANCED AUDIO SIGNAL

   2 Channel Model: ITX/IRX-102, 2 channel balanced audio signal transmission

   8 Channel Model: FTA/FRA/ITX/IRX-108, 8 channel balanced audio signal transmission


 - THE SOLUTION OF SENDING A SOUND SOURCE IN LONG DISTANCE

   Optical Cable Communication [FTA/FRA-108S] : Sending a signal in long distance normal 24km(maximum 28km)

   UTP Cable Communication [ITX/IRX-108(102)] : Sending a signal in long distance (maximum 150m)


 - HIGH QUALITY AUDIO SIGNAL

   It sends the digital signal converted to 24Bit, 48kHz to provide the high quality audio signal

   (higher than S/N 90dB, less than THD 0.01%)


 - AC/DC SUPPORTS

   It responses to the field conditions with supporting AC and DC power input terminals


 - INPUT SENSITIVITY CONTROL FUNCTION THROUGH PAD SWITCHES

    If it is clipped due to high input audio signal level, push the PAD switch to decrease the input signal in 10dB


 - INPUT SIGNAL DISPLAY

   Detects the audio signal and clip approved to each channel and display on the front panel.


 - RS-232/RS-422/CONTACT POINT DATA RECEIVING/SENDING (OPTION MODULE)

   The optional module (CT-100M/CR-100M) can be installed to make a possible to receive and send a RS-232,

   RS-422 and 8 channel contact point data.

Specification

FTA-108S/FRA-108S
Input Sensitivility 0dBV/20kΩ
THD Less than 0.01%
S/N(Rated input max) More than 90dB
Frequency Response 20Hz ~ 20kHz
Channel Separation More than -90dB
Data Rate 24Bit, 48kHz Sampling
Operating Temperature -10°C ~ +40°C/14°F~104°F
Power Source 100–120VAC or 220–240VAC; 50/60Hz
(Supplied AC mains transformer depends on country requirements)
Power Consumption AC 18W, DC 24V, 600mA
Weight (Set) 4.2kg/9.3lbs
Dimensions (Set) 482(W)x44(H)x280(D)mm/19(W)x1.7(H)x11(D)in