ECS-6216S
The ECS-6216S output slave unit allow the addition of 16 output zones to the single bus system 6000. Up to 9 units can be added to the ECS-6216P, giving the system up to 160 output zone capacity. Each unit also offer 16CH GPI sensor input for messaging, event and scenario triggering.
- INTEGRATED SYSTEM
System consists of EMERGENCY SWITCHER, MATRIX, RELAY GROUP, SPEAKER SELECTOR, and
TERMINAL BOARD functions.
- BROADCAST CONTROL DEPENDING ON PRIORITIES
It controls the priority broadcasting by connecting to emergency panel (EP-6216) and remote MIC (RM-6024).
It switches to remote or emergency broadcasting due to priorities of emergency signals or outside remote signals
(remote MIC broadcasting signals) even if during general broadcasting.
- AUTOMATIC FIRE DETECTING FUNCTION
With 16-channels corresponding to fire contact point signals, fire alarm broadcasting will be
transmitted automatically.
- MANUAL CONTROL OF EMERGENCY AND GENERAL BROADCASTS
It can broadcast to desired channels by manually selecting emergency or general broadcasting.
- DISPLAY BROADCASTING STATUS
It displays the priority and broadcasting status on LED, so user can verify the broadcasting status
without any effort.
- MEMORY/SAVE FUNCTION
Fire/RM Macro information will be saved in internal PC memory allowing for normal
operation in event of PC error.
- CHANNEL EXPANSION AND RS-485 COMMUNICATION INTERFACE
Long distance transmission is available and system can be expanded to 160 Zones by utilizing ECS-6216S.
- INSTALLATION TIME AND SPACE
Since it is an integrated system, it is easy to install and can save installation labor, time and space.
- Automatic Check
Check the status of amp connected to each channel automatically according to the time-set.
- Display Amp Status
Display the status of amp connected to each channel by LED
- Automatic Change
Channel which fault occurs when checking out the amp will be switched to spare amp automatically.
- Check Time setup
You can set up 5 different time intervals for automatic self check.
| ECS-6216P/S | ||
| Priority | Emergency>Timer>Remote 1>Remote 2>Main | |
| Channel | 16CH | |
| Communications Protocol | LINK IN/OUT | RS-485 (Maximum: 1km/3,280 feet) |
| RM INPUT (RM1, 2) | RS-422 (Maximum: 1km/3,280 feet) | |
| SOURCE | RS-232 (Maximum: 12m/40 feet) | |
| Fire Sensor | Dry Contact | |
| Operating Temperature | -10°C ~ +40°C/14°F~104°F | |
| Power Source | DC 24V, 900mA | |
| Weight (Set) | 4.3kg/9.5lbs | |
| Dimensions (Set) | 482(W)x88(H)x280(D)mm/19(W)x3.5(H)x11(D)in | |