DIN-PWS60

DIN-PWS60

The DIN-PWS60 is a 60 Watt Cresnet® Power Supply module designed to snap onto a standard DIN rail for installation in a wall-mount enclosure. DIN rail mounting enables modular installation alongside Crestron® DIN Rail lighting and automation control modules and other third-party DIN rail-mountable devices. All wiring connections are made using screw terminals positioned along the top and bottom of the unit, which are clearly accessible from the front for easy installation and servicing. Six Cresnet power ports are provided.

Output
	Output Rating	60 Watts (2.5 Amps) at 24 Volts DC, regulated, limited power source
	Ripple/Noise	<1%
	Efficiency	85%
Input
	Line Power/Mains	200 VA (2 Amps maximum) at 100-277 Volts AC, 50/60 Hz
	Input Current	1.1 Amps at 120 Volts AC; 0.65 Amps at 230 Volts AC; 0.57 Amps at 277 Volts AC; Measured at full rated output
	Power Consumption	70 Watts at full rated output
Connections
	100-277VAC 50/60Hz	(1) Set of (3) captive screw terminals; Line power input and ground; Maximum Wire Size: 12 AWG (2.5 mm²)
	NET	(6) 4-pin 3.5 mm detachable terminal blocks, paralleled; Cresnet power output ports with data pass-through; Maximum Wire Size: 14 AWG (1.5 mm²)
	FUSE	(1) DC output fuse, T3.15AH; 5x20 mm, 250 Volts, 3.15 Amps, time-lag, ceramic cartridge
Indicators
	24VDC	(1) Green LED, indicates 24 Volts DC output at all NET ports; Note: Remains lit when fuse is blown
Enclosure
	Light gray polycarbonate housing with polycarbonate label overlay, UL 94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 6 DIN module spaces (108 mm)
Environmental
	Temperature	32° to 104° F (0° to 40° C)
	Humidity	10% to 90% RH (non-condensing)
	Heat Dissipation	26 BTU/hr
Dimensions
	Height	3.70 in (94 mm)
	Width	4.25 in (108 mm)
	Depth	2.29 in (58 mm)
Weight
	6 oz (170 g)