DIN-8SW8
The DIN-8SW8 is an 8-channel lighting control module designed to support switching of non-dimmable lighting and fans. A single model supports both 120 and 220-240 Volt applications. Each channel handles incandescent loads up to 10 Amps, fluorescent loads up to 5 Amps, and also 1/2 HP motors.
| Load Ratings | ||
| Switch Channels | 8 | |
| Maximum Per Channel | 10 Amps incandescent, 5 Amps fluorescent, 0.5 HP @ 120 to 240 Volts AC, 50/60 Hz; 5 Amps @ 30 Volts DC; 16 Amps Resistive | |
| Module Total | 80 Amps incandescent, 40 Amps fluorescent @ 120 to 240 Volts AC, 50/60 Hz | |
| Load Types* | Incandescent, Magnetic Low-voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent, Motors | |
| Connections | ||
| 1 – 8 | (8) sets of (2) captive screw terminals; Isolated Class 1 SPST relay switch circuits 1 – 8; Relay Rating: 10 Amps incandescent, 5 Amps fluorescent, 16 Amps resistive, 0.5 HP @ 240 Volts AC (per channel); Maximum Wire Size: 12 AWG (2.5 mm²) | |
| NET | (2) 4-pin 3.5mm detachable terminal blocks, paralleled; Cresnet slave port | |
| OVERRIDE | (2) 2-pin 3.5mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24 Volts | |
| Controls & Indicators | ||
| 1 – 8 | (8) Red LEDs and (8) miniature pushbuttons for status indication and local control of each channel | |
| NET ID | (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID | |
| SETUP | (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID | |
| OVR | (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets | |
| PWR | (1) Green LED, illuminates when DC power is applied to the NET port | |
| NET | (1) Yellow LED, indicates communication with the control processor | |
| RESET | (1) Recessed miniature pushbutton, resets internal processor | |
| Enclosure | ||
| Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm) | ||
| Power Requirements | ||
| Cresnet Power Usage | 5.4 Watts (0.23 Amps @ 24 Volts DC) | |
| Environmental | ||
| Temperature | 32° to 104°F (0° to 40°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Heat Dissipation | 18 BTU/hr | |
| Dimensions | ||
| Height | 3.71 in (9.42 cm) | |
| Width | 6.26 in (15.90 cm) | |
| Depth | 2.35 in (5.95 cm) | |
| Weight | ||
| 13.1 oz (369 g) | ||